# Wi-Fi Hacking tools installation

**Kali Linux** → Must be `NAT Network`

**USB Controller** → define type to `USB 2.0`

**We use this card** <https://www.noon.com/egypt-en/ZA929B5991BAF00AB434BZ/p/?shareId=aa04d245-d7cd-4e17-8146-a909f15f36f8>

### to Use Card

![image.png](https://3641998078-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fv4bbPCMP2UOAXGuYloqD%2Fuploads%2FbnsG2VHmOSWF6qz0O19h%2Fimage.png?alt=media)

***

`iwconfig` display all info about card

<figure><img src="https://3641998078-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fv4bbPCMP2UOAXGuYloqD%2Fuploads%2FjKUDuqB48ali67Fe42tJ%2Fimage%201.png?alt=media" alt=""><figcaption></figcaption></figure>

> **support managed mode→ which refer to communication with AP only**

**Monitor Mode** → work on passive but record al traffic in spectrum

**Managed Mode** → communication occur by MAC Address which each message send with MAC Address